Describe Lake Water Treatment.

Concentrations of: Solids, COD, TOC, BOD, Phosphorus, Nitrogen, pH, Turbidity, Conductivity, Dissolved oxygen, metals, Alkalinity, and Hardness.The results (two paragraphs):Results: we need an approximation of what our concentration will be. With evidence to back it up. If you look at an article on science direct they have results from models they make so modelling after that would work pretty well.Prepare tables and/or graphs to summarize the processed data(corrected for dilutions) you obtained during the laboratory. Report mean values, the standard deviation, and the outliers. Do not present “raw”data in the Results section. These values can be included in the appendix if desired. The Results section should also contain text explaining and describing the results. Do not simply put a graph or table, you must describe what the graph or table shows. For the final report you will compare the results for the untreated and treated water. Also point out whether any water quality parameters were correlated (e.g.turbidity and solids). Try different plots of the data to analyze the data for different analyses. Pay attention to the scale of the graphs to report the findings in a representative manner.Conclusions: In a few sentences point out what was done, the major findings, and their implications.